Audio-Technica AT8024

Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment Handles loud sound sources without distortion Three-position adjustable attenuator and switchable low-frequency roll-off Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise Compact, lightweight design with integral shoe mount Red/green LED power indicator Includes windscreen, fuzzy windscreen and AA battery +3 Features With its lightweight yet feature-rich design, the AT8024 Stereo/Mono Camera-Mount Microphone offers a simple, powerful solution for capturing high-resolution audio for video. Selectable line-cardioid mono and internally matrixed mid-side stereo modes provide the flexibility to focus the recording on a single sound source or to widen the field for outstanding sonic realism. In either mode, the AT8024 delivers audio that is dramatically better than that supplied by the camera’s internal microphone. The AT8024 camera-mount microphone also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion. A switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations. The microphone is powered by a single AA battery for optimal performance with high max SPL, and features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders. Specifications

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Line-cardioid, LR stereo
Frequency Response	40-15,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	–37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo)
Maximum Input Sound Level	128 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	Mono: 106 dB, 1 kHz at Max SPL; Stereo: 104 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	Mono: 72 dB, 1 kHz at 1 Pa; Stereo: 70 dB, 1 kHz at 1 Pa
Battery Type	1.5V AA
Battery Current/Life	80 hours typical
Switches	Mono, M-S Stereo; Three-position input pad; Flat, roll-off
Weight	114 g
Cable	Permanently attached 0.2 m -1 m (7.8"- 39.3") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
Dimensions	172 mm (L) x 82 mm (H) x 30mm (W)
Output Connector	3.5 mm stereo mini-plug on cable
Accessories Included	AT8124 Windscreen; AT8124F Fuzzy windscreen; AA battery