The WesAudio LC-EQP sound can be described as clean and clear with a tube nature. It is an ideal equalizer on both, single tracks and the sum. LC-EQP WesAudio handles well controlling other studio devices thanks to low output impedance. It was designed as a universal musical equalizer to use in professional recording studios.
The equalizer input system is based on a Carnhill linear transformer which matching input impedance. The input impedance is >1.5 kOhm. It Is higher than in similar class devices. As a result, the equalizer does not load the signal source, by which it is controlled. The equalization block is a passive system based on coils, resistors and capacitors. The block has been expanded with additional bands for LOW and HIGH section. The EQ section introduces a high attenuation, exceeding 25 dB. A signal regenerative amplifier is a tube system, based on two triodes. The amplifier has been designed without feedback which does not distort transients. The equalizer output is symmetrical. A Carnhill transformer is responsible for output symmetrization, which provides a low output impedance. The anode and heater voltage are stabilized. WesAudio LC-EQP is powered by alternating current 230 V / 115 V, which can be selected by a voltage selector. The casing is 2U rack made of 1.5 mm stainless steel whereas the aluminum front panel is 4 mm. LOW section has separate boost regulations and frequency cut offering six bands. HIGH BOOST section has a selection of 12 bands and a regulation of Q factor . HIGH CUT section is equipped with 6 bands. An EQ IN switch is a “True Bypass” type. Switching the equalizer is indicated by a red LED.
Specifications:- Gain: 0 dB (± 0.5 dB)
- Input impedance: >1.5 kOhm
- Output impedance: 150 ohm
- Max output level: +22 dBu (0.8% THD)
- Frequency response: 5 Hz – 65 kHz (-3 dB)
- SNR ratio: 90 dB
- LOW BOOST: max +18 dB
- LOW CUT: max -18 dB
- HIGH BOOST: max +20 dB
- HIGH CUT: max -18 dB
- LOW BOOST: 20, 30, 60, 100, 120, 250 Hz
- LOW CUT: 20, 30, 60, 100, 120, 250 Hz
- HIGH BOOST: 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20 kHz
- HIGH CUT: 2, 4, 6, 12, 16, 20 kHz
- AC mains: 115 V (60 Hz) / 230 V (50 Hz)
- Transformer balanced output and input (XLR Neutrik)
- Case Rack 2U
- Dimensions : 88 x 483 x 237 mm
- Weight: 7 kg
- 3 year warranty