Регион:
The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge (black). Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

See more Refined High-Fidelity Audio Stunning Look, Stunning Sound

Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.

33_45 Plays 33-1/3 RPM and 45 RPM Switch Built-in Switchable Phono Pre-Amplifier Straight Tonearm Carbon-Fiber Straight Tonearm Moving Magnet AT-VM95E Dual Magnet™ (black) Phono Cartridge Carbon-Fiber Tonearm Designed for a Higher Level of Listening

The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½”-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.

+5 Cartridge Assembly Line Circa 1962 Over 55 Years of Analog Excellence

We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Features Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish High-isolation, height-adjustable feet Built-in switchable phono preamplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover Specifications
Turntable
Type Belt-drive manual turntable
Motor DC servo with Active Speed Stabilization
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminum
Wow and Flutter < 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio >60dB
Output Level Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100-240 V, 50/60 Hz, 0.5 A Max.
Dimensions With dustcover: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 126.0 mm (4.96") H
Without dustcover and hinges: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 114.0 mm (4.49") H
Weight 5.56 kg (12.26 lbs.) without dust cover
Accessories Included Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge (black), 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9')), Dust cover hinges
Notes Tonearm type: Static balanced straight carbon tonearm
Effective arm length: 223.6 mm
Overhang: 18.6 mm
Tracking error angle: <2 degrees
Applicable cartridge weight: 12-17 g
Stylus pressure adjustment range: 0-3 g
Replacement Stylus: AT-VMN95E BK
Videos AT-LPW50PB | Setup Tutorial

This tutorial will guide you through the setup process for the Audio-Technica AT-LPW50PB Fully Manual Belt-Drive Turntable.

Оставьте свой номер телефона, менеджер свяжется с вами в ближайшее время.