Регион:
Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL). +3 Features Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement High front-to-back rejection ratio—cardioid polar pattern improves isolation of desired sound source Direct-coupled, balanced output results in a clean signal even under high-output conditions Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Switchable 80 Hz hi-pass filter and 10 dB pad Rugged turned-brass microphone housing for enduring dependability State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS) Specifications
Microphones
Element Externally polarized (DC bias) capacitor
Polar Pattern Cardioid
Frequency Response 20-20,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity -34 dB (19.9 mV) re 1V at 1 Pa
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal)
Noise 16 dB SPL
Dynamic Range 129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements 48V DC, 4.8 mA typical
Switches Flat, roll-off; 10 dB pad (nominal)
Weight 126 g (4.4 oz)
Dimensions 155.0 mm (6.10") long,
21.0 mm (0.83") maximum body diameter
Output Connector Integral 3-pin XLRM-type
Optional Interchangeable Elements AT4049b-EL (omnidirectional);
AT4053b-EL (hypercardioid)
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
Audio-Technica Case Style S1

Оставьте свой номер телефона, менеджер свяжется с вами в ближайшее время.