Регион:

Audio-Technica AT2022

$ 262 предложить свою цену
Код товара: 41656
Гарантия: 12 месяцев
Статус: Под заказ
X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility Provides the spatial impact and realism of a live sound field Battery operation allows use with most recording devices Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns Ideal for general stereo recording and field sound capture Excellent channel separation Included fuzzy windscreen offers excellent wind protection +4 Features The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug. Specifications
Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern X/Y Stereo
Frequency Response 20 - 20,000 Hz
Low Frequency Roll Off 150 Hz, 6 dB/octave
Open Circuit Sensitivity -41 dB (8.9 mV) re 1V at 1 Pa
Channel Balance <2.5 dB
Maximum Input Sound Level 122 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 103 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 75 dB, 1 kHz at 1 Pa
Battery Type 1.5V AA/UM3
Battery Current/Life 1.2 mA / 500 hours typical (alkaline)
Switches Off, on/flat, on/roll-off
Weight 270g
Cable 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
Dimensions 192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch

Оставьте свой номер телефона, менеджер свяжется с вами в ближайшее время.