Designed to be worn as a lavalier or hidden in clothing, the low-profile AT898 cardioid condenser offers maximum intelligibility, accurate voice reproduction, and unobtrusive appearance for use in houses of worship, broadcast studios, theaters, etc. Includes a clothing clip, viper clip, magnet clip and lanyard, two windscreens, three single mic holders, and two double mic holders.
AT898: 9.8' (3.0 m) permanently attached cable terminated with TA3F connector; AT8537 power module (with 80 Hz high-pass filter) for battery or phantom power.
AT898c: 55" (1.4 m) permanently attached cable (unterminated); no power module.
AT898cH: 55" (1.4 m) permanently attached cable terminated with a screw-down 4-pin connector for use with Audio-Technica cH-style body-pack wireless transmitters; no power module.
AT898cW: 55" (1.4 m) permanently attached cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack wireless transmitters; no power module.
AT898cT4: 55" (1.4 m) permanently attached cable terminated with TA4F connector for Shure wireless systems; no power module.
See more Features Designed to be worn as a lavalier or hidden in clothing, Audio-Technica’s discreet-design cardioid AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive appearance for use in houses of worship, broadcast studios, theaters, etc. Its switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power. Specifications
Fixed-charge back plate permanently polarized condenser
200 - 15,000 Hz
Low Frequency Roll Off
80 hz, 12 dB/octave (wired only)
Open Circuit Sensitivity
Phantom : –43dB (7.0mV), re 1V at 1Pa Battery : –46dB (5,0mV), re 1V at 1Pa
Maximum Input Sound Level
Phantom: 131 dB SPL, 1 kHz at 1% T.H.D. - Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Phantom: 100dB,1 kHz at max SPL - Battery: 84dB ,1 kHz at max SPL (wired only)
63dB, 1 kHz at 1Pa
Phantom Power Requirements
11- 52V DC, 2 mA typical (wired only)
1.5V AA-UM3 (wired only)
0.4 mA typical / 1200 hours (alkaline battery) (wired only)
Flat, roll-off (recessed) (wired only)
Microphone 0.9 g - Power module 102 g (wired only)
3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module (wired only)
Microphone 23.0 mm long, 5.3 mm diameter - Power Module 145.0 mm long, 21.0 mm diameter (wired only)
Integral 3-pin XLRM-type (wired only)
AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens; battery (wired only); protective carrying case
Заводская спецификация и комплектация с сайта производителя